2011 BALDWIN-MOTION FANTASTIC FIVE!

STANDARD EQUIPMENT SPECIFICATIONS

MOTION SS-427 CAMARO
525 HORSEPOWER

  • GM LS7 427 Aluminum Engine
  • 7,000-RPM Redline
  • Unique 4.125-inch bore block, pressed-in liners
  • Cast Aluminum 11.0-to-1 flat-top pistons
  • Titanium connecting rods.
  • Forged steel 4.00-inch stroke crankshaft
  • Race-prepped CNC-ported Aluminum heads
  • Titanium intake; Sodium-filled exhaust valves
  • ATI/Redline damper
  • Six-Speed manual transmission
  • Paddle-shift 6L80E automatic (OPTIONAL)
  • Z06 Corvette clutch
  • American Racing High-Efficiency tubular exhaust system
  • MBRP Stainless Steel mufflers
  • High -Flow air intake system
  • 160-degree High-Flow thermostat
  • Custom calibrated Engine Management System
  • MGW short throw shifter
  • GM wheels
  • Custom painted MOTION graphics
  • Perforated seat inserts
  • Custom embroidered headrests
  • MOTION badges & VIN plates
  • 3-Year/36,000-Mile Warranty

MOTION PHASE III 427 CAMARO
600 HORSEPOWER

  • GM LS7 427 Aluminum Engine
  • 7,000-RPM redline
  • Unique block, 4.125-inch bore, pressed-in liners
  • Cast Aluminum 11.0-to-1 flat-top pistons
  • Titanium connecting rods
  • 4.00-inch stroke crankshaft
  • Race-prepped CNC-ported Aluminum heads
  • Custom Redline R3 camshaft
  • Titanium intake; Sodium-filled exhaust valves
  • HD dual valve springs with Titanium retainers, locks & keepers
  • FAST 102-mm LSX-R 102-mm intake manifold
  • American Racing High-Efficiency tubular exhaust system
  • ATI/Redline damper
  • Six-Speed manual transmission
  • Paddle-shift 6L80E automatic (OPTIONAL)
  • Z06 Corvette clutch
  • MBRP Stainless Steel mufflers
  • High-Capacity air intake system
  • 160-degree high-flow thermostat
  • Relocated heater hoses, fuel lines, evap. & tb.
  • Custom calibrated Engine Management system
  • Custom Powder-Coated valve covers with coil relocation
  • MGW short throw shifter
  • Custom painted MOTION graphics
  • Custom MOTION wheels (stock size tires)
  • Custom Phase III Hood with Heat Extractors
  • Phase III Eliminator Rear Spoiler
  • MOTION badges & VIN plates
  • Carbon-Fiber-look seat inserts
  • Custom embroidered headrests
  • Accented shifter boot; center compartment lid
  • MOTION floor mats
  • 2-Year/24,000-Mile Warranty

MOTION SS-454 CAMARO
550 HORSEPOWER

  • GM LSX 454 Engine
  • Bore: 4.185-inch; Stroke: 4.125-inch
  • Cast-Iron block, six-bolt cross-bolted mains
  • Forged Aluminum 11.0-to-1 pistons
  • Steel connecting rods
  • Forged 4340 Steel crankshaft
  • Aluminum (production) LS7 cylinder heads
  • Corvette Z06 LS7 intake manifold
  • Redline Stage 1 hydraulic roller camshaft
  • Titanium intake; Sodium-filled exhaust valves
  • American Racing High-Efficiency tubular exhaust system
  • MBRP Stainless Steel mufflers
  • ATI/Redline damper
  • Six-Speed manual transmission
  • Paddle-shift 6L80E automatic (OPTIONAL)
  • Z06 Corvette clutch
  • High Capacity air intake system
  • 160-degree high-flow thermostat
  • Custom calibrated Engine Management System
  • 454 LSX valve covers
  • MGW short throw shifter
  • Custom painted MOTION graphics
  • GM wheels
  • MOTION badges & VIN plates
  • Perforated seat inserts, embroidered headrests
  • MOTION floor mats
  • 3-Year/36,000-Mile Warranty

MOTION PHASE III 454 CAMARO
625 HORSEPOWER (TORQUE MONSTER!)

  • GM LSX 454 Engine
  • Bore: 4.185-inch; Stroke: 4.125-inch
  • Cast-Iron block, six-bolt cross-bolted mains
  • Forged Aluminum 11.0-to-1 pistons
  • Steel connecting rods
  • Forged 4340 Steel crankshaft
  • Race-prepped CNC-ported LS7 Aluminum heads
  • Redline Stage 3R hydraulic roller camshaft
  • Titanium intake; Sodium-filled exhaust valves
  • FAST 102-mm LSX-R intake manifold
  • American Racing High-Efficiency tubular exhaust system
  • MBRP Stainless Steel mufflers
  • ATI/Redline damper
  • High-Capacity air intake system
  • 160-degree high-flow thermostat
  • Custom calibrated Engine Management System
  • 454 LSX valve covers
  • Six-Speed manual transmission (ONLY)
  • Z06 Corvette clutch
  • MGW short throw shifter
  • Custom painted MOTION graphics
  • Custom MOTION wheels (stock size tires)
  • Custom Phase III Hood with Heat Extractors
  • Custom Phase III 454 Rear Spoiler
  • MOTION badges & VIN plates
  • Custom Carbon-Fiber-look seat inserts
  • Custom embroidered headrests
  • MOTION floor mats
  • Solid rear cradle; Poly differential bushings
  • 2-Year//24,000-Mile Warranty

MOTION PHASE III 427-SC CAMARO SUPERCAR
800 HORSEPOWER SUPERCHARGED

  • Supercharged GM LS7 427 Aluminum Engine
  • 2.8-Liter Twin-Screw Supercharger System
  • Eight-Rib supercharger drive assembly
  • Unique block, 4.125-inch bore, pressed-in liners
  • Forged 2618 Aluminum 9.3-to-1 pistons
  • Forged 6.125-inch H-Beam Steel connecting rods
  • Forged 4.00-inch stroke steel crankshaft
  • Race-prepped CNC-ported Aluminum heads
  • Custom Redline R3-SC Blower camshaft
  • ATI/Redline damper
  • American Racing High-Efficiency tubular exhaust system
  • MBRP Stainless Steel mufflers, dual outlets
  • High-Capacity air intake system
  • 160-degree high-flow thermostat
  • Custom calibrated Engine Management System
  • High-Capacity fuel system
  • Upgraded TR6060 Six-Speed manual transmission (ONLY)
  • ZR1 Corvette dual disc clutch system
  • MGW short throw shifter
  • 1,000 Horsepower axles
  • Pfadt Billet rear cradle mounts
  • Pfadt differential bushings
  • Pfadt trailing arms & tie rods
  • Pfadt Coil-Over F&R Suspension
  • Pfadt F&R sway bars
  • Brembo Six-Piston Monoblock front brakes with 380-mm two-piece rotors
  • Brembo Four-Piston Monoblock rear brakes with 380-mm two-piece rotors
  • Custom MOTION painted striping
  • Custom MOTION wheels with painted accents
  • Custom Phase III-SC Hood with glass window
  • Aggressive front fascia with air intake inlets
  • Phase III-SC Rear Spoiler
  • MOTION badges & VIN plates
  • Accented front and rear seats with embroidered headrests with Carbon Fiber finish
  • 1-Year/12,000-Mile Warranty